Show Interfaces Status - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces status

Displays interface line settings (e.g., speed and mode).
show interfaces [slot[/port[-port2]]] status
Syntax Definitions
slot
port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If no slot/port numbers are entered, line settings for all slots/ports on the switch are displayed.
•
You can display a specific interface by entering the slot and port number (e.g., 3/1).
•
You can display a range of port numbers (e.g., 3/1-4).
•
You can display all interfaces in a slot by entering the slot number (e.g., 3).
•
The show interfaces status command displays the status and configuration of the active port in the
first row and the status and configuration of the other port in the following row. See the
faces hybrid status
•
The hybrid mode for combo ports is not configurable; combo ports are set to preferred fiber by default.
As a result, the Hybrid Mode field always displays preferred fiber (PF) for all combo ports. For non-
combo ports, the Hybrid Type and Hybrid Mode fields display NA.
page 20-56
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
command for more information.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
show inter-
November 2009