Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 191

Session Management Commands
output definitions (continued)
Ip Address
Read-only domains
Read-only families
Read-Write domains
Read-Write families
End-User Profile
Possible values for command domains and families are listed here:
domain
domain-admin
domain-system
domain-physical
domain-network
domain-layer2
domain-service
domain-security
Release History
Release 6.6.1; command was introduced.
Related Commands
whoami
kill
MIB Objects
SessionActive
sessionIndex
sessionAccessType
sessionPhysicalPort
sessionUserName
sessionUserReadPrivileges
sessionUserWritePrivileges
sessionUserProfileNumber
sessionUserIpAddress
sessionRowStatus
OmniSwitch 6250 CLI Reference Guide
User IP address.
The command domains available with the user's read-only access. See
the table beginning on page 6-31
The command families available with the user's read-only access. See
the table beginning on page 6-31
The command domains available with the user's read-write access. See
the table beginning on page 6-31
The command families available with the user's read-write access. See
the table beginning on page 6-31
The name of an end-user profile associated with the user.
families
file image bootrom telnet reset dshell debug
system aip snmp rmon webmgt config
chassis module interface pmm flood health
ip rip iprm ipmr ipms
vlan bridge stp 802.1q linkagg ip-helper
ldap dhcp dns
session binding avlan aaa
Displays current user session.
Kills another user's session.
November 2009
for a listing of valid domains.
for a listing of valid families.
for a listing of valid domains.
for a listing of valid families.
page 6-31