14 Interswitch Protocol
Alcatel-Lucent Interswitch Protocols (AIP) are used to discover and advertise adjacent switch
information. Only one protocol is supported:
•
Alcatel-Lucent Mapping Adjacency Protocol (AMAP), used to discover the topology of
OmniSwitches.
This chapter includes descriptions of AMAP commands.
MIB information for AMAP commands is as follows:
Filename:
alcatelIND1InterswitchProtocol.MIB
Module:
ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB
A summary of the available commands is listed here:
Mapping Adjacency Protocol
OmniSwitch 6250 CLI Reference Guide
amap
amap discovery time
amap common time
show amap
November 2009
Commands
page 14-1