Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 750

output definitions (continued)
AutoNeg
Flow
Crossover
Speed
Duplex
Release History
Release 6.6.1; command was introduced.
Related Commands
interfaces hybrid autoneg
interfaces hybrid crossover
interfaces hybrid speed
interfaces hybrid duplex
show interfaces hybrid status
MIB Objects
esmConfTable
esmPortCfgSlot
esmPortCfgIfIndex
esmHybridConfTable
esmHybridPortCfgAutoNegotiation
esmHybridPortCfgFlow
esmHybridPortCfgCrossover
esmHybridPortCfgSpeed
esmHybridPortCfgDuplex
page 20-78
In the row labeled CAP this field displays the valid auto negotiation
configurations for the port. In the row label DEF this field displays the
default auto negotiation settings for the port. The possible values are
EN (enabled) or DIS (disabled).
In the row labeled CAP this field displays the valid flow configurations
for the port. In the row label DEF this field displays the default flow
settings for the port. The possible values are EN (enabled) or DIS (dis-
abled).
In the row labeled CAP this field displays the valid cross over configu-
rations for the port. In the row label DEF this field displays the default
cross over settings for the port. The possible values are Auto,
MDI/X/Auto (MDI/MDIX/Auto), or -- (not configurable and/or not
applicable).
In the row labeled CAP this field displays the valid line speed configu-
rations for the port. In the row label DEF this field displays the default
line speed settings for the port. The possible values are 10/100, 100,
1G, 10/100/1G, or Auto.
In the row labeled CAP this field displays the valid duplex configura-
tions for the port. In the row label DEF this field displays the default
duplex settings for the port. The possible values are Full, Full/Half, or
Auto.
Enables and disables auto negotiation for combo ports.
Configures crossover port settings for combo ports.
Configures interface speed for combo ports.
Configures duplex settings for combo ports.
Displays interface line settings for combo ports.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
November 2009