Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 110

output definitions (continued)
State
Running Mode
Saved Mode
Release History
Release 6.6.1; command was introduced.
Related Commands
stack set slot mode
MIB Objects
alaStackMgrChassisTable
alaStackMgrSlotNINumber
alaStackMgrSlotCMMNumber
alaStackMgrChasRole
alaStackMgrChasState
alaStackMgrCommandAction
alaStackMgrCommandStatus
page 2-58
The current operational state of the switch:
UNKNOWN: the state of the element cannot be determined
RUNNING: element is up and running
DUP SLOT: this element has a duplicate slot number
CLR SLOT: the slot number of the element has been cleared via man-
agement command after the last reboot
OUT SLOT: the element cannot initialize because there are no slot Ids
left to be assigned
The current mode of the switch.
The mode the switch will be in after a reboot. The output is based on
contents of "boot.slot.cfg" file.
Changes the stacking/standalone mode of the switch.
OmniSwitch 6250 CLI Reference Guide
Chassis Management and Monitoring Commands
November 2009