Lanpower Stop - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

lanpower stop

Manually disables power on a single specified PoE port or on all PoE ports in a specified slot.
lanpower stop {slot/port[-port2] | slot}
Syntax Definitions
slot/port
port2
slot
Defaults
Power over Ethernet operational status is globally disabled by default.
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
N/A
Examples
-> lanpower stop 5/22
-> lanpower stop 5
-> lanpower stop 5/22-27
Release History
Release 6.6.1; command was introduced.
Related Commands
lanpower start
lanpower combo-port
MIB Objects
alaPethMainPseGroup
alaPethMainPseAdminStatus
pethPsePortTable
pethPsePortAdminEnable
page 4-4
Disables inline power on the specified PoE port only.
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
Disables inline power on all PoE ports in the corresponding slot.
Activates inline power on a single specified PoE port or on
all PoE ports in a specified slot.
Displays current inline power status and related statistics for
all PoE ports in a specified slot.
OmniSwitch 6250 CLI Reference Guide
Power over Ethernet (PoE) Commands
November 2009