Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 161

6 Session Management
Session Management commands are used to monitor and configure operator sessions including FTP,
Telnet, HTTP (WebView), console, Secure Shell, and Secure Shell FTP on the switch. (See the SNMP
Commands chapter for SNMP session commands.) Maximum number of concurrent sessions allowed:
Session
Telnet(v4 or v6)
FTP(v4 or v6)
SSH + SFTP(v4 or v6 secure
sessions)
HTTP
Total Sessions
SNMP
MIB information for commands in this chapter are as follows:
Filename: AlcatelInd1SessionMgr.mib
Module: AlcatelIND1SessionMgrMIB
Filename: AlcatelIND1AAA.mib
Module: Alcatel-IND1-AAA-MIB
Filename: AlcatelIND1System.mib
Module: Alcatel-IND1ConfigMgr.mib
Filename: AlcatelIND1Ssh.mib
Module: ALCATEL-IND1-SSH-MIB
OmniSwitch 6250 CLI Reference Guide
OS-6250
4
4
8
4
20
50
November 2009
Commands
page 6-1