Show History - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show history

Displays commands that you have recently issued to the switch. The commands are displayed in a
numbered list.
show history [parameters]
Syntax Definitions
parameters
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show history
1 show cmm
2 show fan
3 show sensor
4 show temp
5 show time
6 show arp
7 clear arp
8 show prefix
-> show history parameters
History size: 10
Current Size: 7
Index Range: 1-7
output definitions
History Size
Current Size
Index Range
Release History
Release 6.6.1; command was introduced.
page 6-20
When this syntax is used, the CLI displays the history buffer size, the
current number of commands in the history buffer, and the index range
of the commands.
The size of the history buffer.
The number of commands currently stored in the history buffer for this
session.
The index range of the commands for this CLI session currently stored
in the history buffer.
OmniSwitch 6250 CLI Reference Guide
Session Management Commands
November 2009