Chapter 13 802.1Ab Commands - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

13 802.1AB Commands
Alcatel-Lucent's 802.1AB is an IEEE standard for exchanging information with neighboring devices and
maintaining a database of the information. The information is exchanged using the LLDPDU (Link Layer
Discovery Protocol Data Unit) in TLV (Time, Length, Value) format. This chapter details configuring and
monitoring 802.1AB on a switch.
Alcatel-Lucent's version of 802.1AB complies with the IEEE 802.1AB-2005 Station and Media Access
Control Discovery and ANSI-TIA 1057-2006 Link Layer Discovery Protocol for Media End Point
Devices.
MIB information for the 802.1AB commands is as follows:
Filename: IEEE_LLDP_Base.mib
Module: LLDP-MIB
Filename: IEEE_LLDP_Dot1.mib
Module: LLDP-EXT-DOT1-MIB
Filename: IEEE_LLDP_Dot3.mib
Module: LLDP-EXT-DOT3-MIB
A summary of available commands is listed here:
lldp transmit interval
lldp transmit hold-multiplier
lldp transmit delay
lldp reinit delay
lldp notification interval
lldp lldpdu
lldp notification
lldp tlv management
lldp tlv dot1
lldp tlv dot3
lldp tlv med
show lldp system-statistics
show lldp statistics
show lldp local -system
show lldp local -port
show lldp local-management-address
show lldp remote-system
Configuration procedures for 802.1AB are explained in the "Configuring 802.1AB" chapter of the
OmniSwitch 6250 Network Configuration Guide.
OmniSwitch 6250 CLI Reference Guide November 2009 page 13-1