Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 228

rm
Permanently deletes an existing file. This command can also delete a directory if the -r keyword is used.
rm [-r] [path/]filename
Syntax Definitions
-r
path
filename
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Be sure to separate path directories and file names with a slash (/). Refer to the examples below.
•
Use care when deleting files. Depending on your switch and network configurations, specific configu-
ration and image files must be present for your system to work properly.
•
This command can also be used on the secondary CMM.
Examples
-> rm test_config_file
-> rm flash/test_config_file
Release History
Release 6.6.1; command was introduced.
Related Commands
delete
page 7-16
Syntax that recursively removes directories, as well as any associated
subdirectories and files. Be sure to include a space between the syntax
rm and -r (i.e., rm -r).
The path (i.e., location) containing the file being removed. If no path is
specified, the command assumes the current directory.
The name of the existing file being deleted. Up to thirty-two (32) char-
acters may be used (e.g., test_config_file).
Deletes an existing file.
OmniSwitch 6250 CLI Reference Guide
File Management Commands
November 2009