Lldp Lldpdu - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

802.1AB Commands

lldp lldpdu

Specifies the switch to control the transmission and the reception of LLDPDUs for a particular chassis, a
slot, or a port.
lldp {slot/port | slot | chassis} lldpdu {tx | rx | tx-and-rx | disable}
Syntax Definitions
slot/port
slot
tx
rx
tx-and-rx
disable
Defaults
parameter
tx | rx | tx-and-rx | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The port can be set to receive, transmit, or transmit and receive LLDPDUs using this command.
•
If this command is applied to a slot or chassis, then the existing configuration related to this command
will be lost.
Examples
-> lldp 1/2 lldpdu tx-and-rx
-> lldp chassis lldpdu disable
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
Transmits LLDPDUs.
Receives LLDPDUs.
Transmits and receives LLDPDUs.
Disables LLDPDUs transmission and reception.
default
tx-and-rx
November 2009 page 13-7