Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 388

A port that belongs to a static aggregate is specified:
-> show linkagg port 4/1
Static Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Port position in the aggregate: 0,
Primary port
Output fields are defined here:
output definitions
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Port position in the aggregate
Primary Port
page 12-50
: 4001,
: 4/1,
: ENABLED,
: DOWN,
: CONFIGURED,
: DOWN,
: 2,
: NONE
The SNMP ID associated with this port.
The slot and port number.
The current administrative state of this port, which can be ENABLED
or DISABLED.
The current operational state of the port, which can be UP or DOWN.
The current operational state of the port, which can be
CONFIGURED, PENDING, SELECTED, or RESERVED.
The current operational state of the link from this port to its remote
partner, which can be UP or DOWN.
The number associated with the static aggregate group to which the
port is attached.
The rank of this port within the static aggregate group. Possible values
are 0–15.
The port number of the first port to join this static aggregate group. If
the first port to join the aggregate is no longer part of the aggregate
group, the switch automatically assigns another port in the aggregate
group to be the primary port.
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
November 2009