Show Loopback-Detection Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Loopback Detection Commands

show loopback-detection port

Displays global LBD configuration information on the switch. When slot and port number is mentioned,
the LBD configuration information of the specific port is displayed.
show loopback-detection port [slot/port]
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Use this command to view LBD information of a specific port on a switch.
Examples
-> show loopback-detection port
Slot/Port Admin State
-------------+---------------+-----------------
1/2 enabled
-> show loopback-detection port 1/1
Global LBD Status
Global LBD Transmission Timer
Global LBD Transmission Timer
Port LBD Status
Port LBD State
output definitions
Global LBD Status
Globas LBD Transmission
Timer
Global LBD Auto-recovery
Timer
Slot/Port
Admin State
Oper State
OmniSwitch 6250 CLI Reference Guide
OperState
Normal
: Enabled
: 200 sec
: 300 sec
: Enabled
: Normal
The current status of LBD of the switch (Enabled or Disabled).
Displays the time interval in seconds between LBD packet transmis-
sions.
Displays the autorecovery time period in seconds. It is the time period
that passes after which ports that were shut down through LBD are
moved to normal state.
The slot/port number LBD port.
The administrative state of the port (Enabled or Disabled).
The operational state of the port (Normal or Inactive).
November 2009 page 17-9