Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 895

VLAN Stacking Commands
Service Name : ipmv_service
IPMVLAN : 40
NNI(s) : No NNIs configured
SAP Id : 2
UNIs
CVLAN(s)
sap-profile : translate_profile
-> show ethernet-service service-name CustomerABC
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs
CVLAN(s)
sap-profile : default-sap-profile
-> show ethernet-service svlan 300
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs
CVLAN(s)
sap-profile : sap-video1
SAP Id : 30
UNIs
CVLAN(s)
sap-profile : sap-video2
output definitions
Service Name
SVLAN or IPMVLAN
NNI(s)
SAP Id
UNIs
CVLAN(s)
sap-profile
Release History
Release 6.6.1; command was introduced.
OmniSwitch CLI Reference Guide
: 1/22
: 100
: 2/10, 2/11
: 500, 600
: 1/1, 1/2
: 10, 20
: 1/3
: 30, 40
The name of the VLAN Stacking service.
Displays the SVLAN ID associated with the service. Note that SVLAN
appears as the field name if the VLAN ID is an SVLAN; IPMVLAN
appears as the field name if the VLAN ID is an IP Multicast SVLAN.
VLAN Stacking Network Network Interface ports associated with the
service to tunnel SVLAN customer traffic.
The ID number for the VLAN Stacking Service Access Point that is
applied to the service.
VLAN Stacking User Network Interface ports that receive customer
traffic.
Customer VLAN IDs ingressing on UNI ports.
The name of the SAP profile associated with the SAP.
November 2009 page 24-33