Pwd - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

File Management Commands

pwd

Displays the switch's current working directory.
pwd
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command can also be used on the secondary CMM.
Examples
-> pwd
/flash
Release History
Release 6.6.1; command was introduced.
Related Commands
cd
mkdir
rmdir
ls
dir
MIB Objects
systemServices
systemServicesWorkingDirectory
OmniSwitch 6250 CLI Reference Guide
Changes the switch's current working directory.
Creates a new directory.
Deletes an existing directory.
Displays the contents of a specified directory or the current working
directory.
Displays the contents of a specified directory or the current working
directory.
November 2009 page 7-5