Show Interfaces Hybrid Traffic - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces hybrid traffic

Displays interface traffic statistics for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} traffic
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
If a specific slot or slot/port number is not entered with this command, the traffic statistics for all switch
combo ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display information for a specific combo
port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
Examples
-> show interfaces hybrid fiber traffic
Slot/Port Input packets
---------+-----------------+-----------------+-----------------+-----------------
01/25
01/26
output definitions
Slot/Port
Input packets
Input bytes
Output packets
Output bytes
page 20-88
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper RJ-45 port(s) will be displayed.
Input bytes
0
0
Interface slot and port numbers.
Input packets detected.
Input bytes detected.
Output packets detected.
Output bytes detected.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
Output packets Output bytes
0
0
0
0
November 2009