Https Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Web Management Commands

https port

Changes the default secure HTTP (HTTPS) port for the embedded Web server.
https port {default | port}
Syntax Definitions
default
port
Defaults
parameter
port
Platforms Supported
OmniSwitch 6250
Usage Guidelines
All WebView sessions must be terminated before entering this command.
Examples
-> https port 1026
-> https port default
Release History
Release 6.6.1; command was introduced.
Related Commands
http server
show http
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaIND1WebMgtHttpsPort
OmniSwitch 6250 CLI Reference Guide
Restores the port to its default (443) value.
The desired HTTPS port number. The number must be in the range 0 to
65535; well-known port numbers cannot be configured.
default
443
Enables/disables web management on the switch.
Displays web management configuration information.
November 2009 page 8-5