Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 449

Distributed Spanning Tree Commands
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge protocol
bridge 1x1 protocol
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsProtocolSpecification
OmniSwitch 6250 CLI Reference Guide
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree protocol for the flat
mode instance or for a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree protocol for a VLAN
instance.
November 2009 page 16-9