Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 348

Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to remove a dynamic aggregate group from the configuration.
•
The maximum number of link aggregate groups allowed on the switch (static and dynamic combined)
is 32.
•
If the dynamic group has any attached ports, you must disable the group with the
state command before you can delete it.
•
Optional parameters for the dynamic aggregate group may be configured when the aggregate is created
or the dynamic aggregate group may be modified later.
•
Use the static linkagg size
mation about this command.
Examples
-> lacp linkagg 2 size 4
-> lacp linkagg 3 size 2 admin state disable actor system priority 65535
Release History
Release 6.6.1; command was introduced.
Related Commands
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggSize
alclnkaggAggLacpType
alclnkaggAggName
alclnkaggAggAdminState
alclnkaggAggActorAdminKey
alclnkaggAggActorSystemPriority
alclnkaggAggActorSystemID
alclnkaggAggPartnerSystemID
alclnkaggAggPartnerSystemPriority
alclnkaggAggPartnerAdminKey
page 12-10
default
enable
command to create static aggregate groups. See
Displays information about static and dynamic (LACP) aggregate
groups.
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
lacp linkagg admin
page 12-3 for more infor-
November 2009