Show Linkagg Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Link Aggregation Commands

show linkagg port

Displays the aggregate group information about a particular slot and port.
show linkagg port [slot/port]
Syntax Definitions
slot
port
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If no slot/port is specified, the information for all slots/ports is displayed. If a particular slot or port is
specified, the fields displayed depend upon whether or not the port belongs to a static aggregate group or
dynamic (LACP) aggregate group.
Examples
-> show linkagg port
Slot/Port Aggregate
---------+-----------+--------+--------------+-------
2/16 Dynamic
2/17 Dynamic
3/ 1 Static
Output fields are defined here:
output definitions
Slot/Port
Aggregate
SNMP Id
Status
Agg
OmniSwitch 6250 CLI Reference Guide
The slot number for this aggregate.
The port number for this aggregate.
SNMP Id Status
2016 CONFIGURED
2017 CONFIGURED
3001 CONFIGURED
The slot/port associated with the aggregate group.
The type of aggregate group associated with the port, either Static or
Dynamic.
The SNMP ID associated with the aggregate group.
The current status of the port, which can be
CONFIGURED, PENDING, SELECTED, or RESERVED.
The number of the aggregate groups associated with this port.
November 2009
Agg
NONE
NONE
2
page 12-49