Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 579

Hide thumbs Also See for OmniSwitch 6250:

Table of Contents

Distributed Spanning Tree Commands

output definitions

OS8800 10G Opt.

-> bridge mode flat

-> bridge protocol mstp

-> show spantree ports

Port Oper Status

-----+-----+------------+---------+-----

OmniSwitch 6250 CLI Reference Guide

The manual mode setting for the port: yes indicates that the blocking or

forwarding state of the port was manually set and the port does not par-

ticipate in the Spanning Tree Algorithm; no indicates that the Spanning

Tree Algorithm is managing the port state. Configured through the

bridge slot/port mode

The configured path cost value for this port. Configured through the

bridge slot/port path cost

The administrative connection type: PTP, NPT, or AUT. Configured

The edge port administrative status: yes indicates that the port is an

admin edge port; no indicates that the port is not an admin edge port.

Configured through the

The edge port automatic status: yes indicates that the port is an auto-

matic edge port; no indicates that the port is not an automatic edge port.

Configured through the

slot/port auto-edge

The restricted TCN capability: yes indicates that the port supports the

restricted TCN capability; no indicates that the port does not support

the restricted TCN capability. Configured through the

port restricted-tcn

The restricted role port status: yes indicates that the port is a restricted

role port; no indicates that the port is not a restricted role port. Config-

ured through the

slot/port restricted-role

November 2009

bridge slot/port connection

bridge cist slot/port auto-edge

bridge 1x1 slot/port restricted-tcn

bridge cist slot/port restricted-role

bridge cist slot/