Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 482

Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge cist forward delay
bridge 1x1 forward delay
bridge rrstp ring vlan-tag
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsMode
vStpInsBridgeForwardDelay
page 16-42
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Explicit command for changing the Spanning Tree forward delay time
value for the CIST instance when the switch is operating in either the
flat or 1x1 mode.
Explicit command for changing the Spanning Tree forward delay time
value for a VLAN instance when the switch is operating in either the flat
or 1x1 mode.
Displays VLAN Spanning Tree parameter values.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009