Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 744

output definitions (continued)
Detected Duplex
Detected Hybrid Type
Configured Speed
Configured Duplex
Configured Hybrid Mode
Trap Link Up/Down
Release History
Release 6.6.1; command was introduced.
Related Commands
trap port link
interfaces hybrid speed
interfaces hybrid duplex
interfaces clear-violation-all
MIB Objects
ifTable
ifLinkUpDownTrapEnable
esmConfTable
esmPortSlot
esmPortIF
esmPortAutoSpeed
esmPortAutoDuplexMode
esmHybridConfTable
esmPortCfgHybridMode
esmPortCfgHybridType
esmHybridPortCfgSpeed
esmHybridPortCfgDuplexMode
page 20-72
Detected line duplex (Half duplex/Full duplex/Auto).
The detected combo port type, which can be F (fiber) or C (copper).
Configured line speed (10/100/Auto/1000/10000 Mbps).
Configured line duplex (Half duplex/Full duplex/Auto).
The configured combo port type, which is PF (Preferred Fiber). Con-
figuring the Hybrid Mode is not supported.
Trap Link status (up/down).
Enables/disables Trap LinkUpDown.
Configures interface line speed on combo ports.
Configures duplex mode on combo ports.
Configures one or more combo ports to use the fiber SFP port(s)
instead of the equivalent copper RJ-45 port(s) when both ports are
enabled and have a valid link.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
November 2009