Lldp Reinit Delay - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

802.1AB Commands

lldp reinit delay

Sets the time interval that must elapse before the current status of a port is reinitialized after a status
change.
lldp reinit delay seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250 .
Usage Guidelines
The LLDP protocol must be enabled before using this command.
Examples
-> lldp reinit delay 4
Release History
Release 6.6.1; command was introduced.
Related Commands
lldp transmit delay
show lldp local -system
MIB Objects
lldpConfiguration
lldpReinitDelay
OmniSwitch 6250 CLI Reference Guide
The number of seconds to reinitialize the ports status after a status
change. The valid range is 1-10.
default
2
Sets the minimum time interval between successive LLDPDUs trans-
mitted.
Displays local system information.
November 2009 page 13-5