Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 580

0 1/22
0 1/23
0 1/24
0 5/1
0 5/2
1 1/1
1 1/2
1 1/3
1 1/4
1 1/5
1 1/6
1 1/7
1 1/8
1 1/9
1 1/10
1 1/11
1 1/12
1 1/13
1 1/14
1 1/15
1 1/16
1 1/17
1 1/18
1 1/19
1 1/20
1 1/21
1 1/22
1 1/23
1 1/24
-> show spantree ports active
Msti Port Oper Status
-----+-----+------------+---------+-----
0 1/1
1 1/1
2 1/1
output definitions
Msti
Port
Oper St
Path Cost
Role
page 16-140
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
FORW 200000
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
Path Cost
FORW 200000
FORW 200000
FORW 200000
The Multiple Spanning Tree Instance (MSTI) instance number. Config-
ured through the
sents the CIST instance that is always present on the switch.
The slot number for the module and the physical port number or a logi-
cal port. If the slot number is 0, then the port number refers to a link
aggregate logical port number (e.g., 0/31).
The port operational state as defined by application of the Spanning
Tree Protocol. Possible port operational states include: disabled, block-
ing, learning, and forwarding.
The contribution of this port to the path cost towards the Spanning Tree
root bridge that includes this port. Path cost is a measure of the distance
of the listed port from the root bridge in the number of hops. Config-
ured through the
The role of the port for this Spanning Tree instance. Possible port roles
are: root, designated, alternate, and backup.
DIS
DIS
DIS
DIS
DIS
MSTR
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
Role
ROOT
MSTR
MSTR
bridge msti command. Note that MSTI 0 also repre-
bridge slot/port path cost
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
command.
November 2009