Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 775

Port Mobility Commands
Examples
-> vlan 10 dhcp port 3/1
-> van 20 dhcp port 4/1-16
-> vlan 30 dhcp port 5/1-32 6/5-10 8/7-22
-> vlan 10 no dhcp port 3/1
-> vlan 20 no dhcp port 4/1-16
Release History
Release 6.6.1; command was introduced.
Related Commands
vlan dhcp mac
vlan dhcp mac range
vlan dhcp generic
show vlan
show vlan rules
MIB Objects
vDhcpPortRuleTable
vDhcpPortRuleIfIndex
vDhcpPortRuleVlanId
vDhcpPortRuleStatus
OmniSwitch 6250 CLI Reference Guide
Defines a DHCP MAC address rule for an existing VLAN. Mobile ports
that receive DHCP frames with a source MAC address that matches the
address specified by this rule are temporarily assigned to the VLAN.
Defines a DHCP MAC address range rule for an existing VLAN.
Mobile ports that receive DHCP frames with a source MAC address that
falls within the range specified by this rule are temporarily assigned to
the VLAN.
Defines a generic DHCP rule for an existing VLAN. Mobile ports that
receive DHCP frames that do not match other DHCP rules are tempo-
rarily assigned to the VLAN.
Displays existing VLANs.
Displays rules defined for VLANs.
November 2009 page 21-7