Ip Domain-Lookup - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ip domain-lookup

Enables or disables the DNS resolver.
ip domain-lookup
no ip domain-lookup
Syntax Definitions
N/A
Defaults
By default, the DNS resolver is disabled.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to disable the DNS resolver.
•
You must use the ip domain-name command to set a default domain name for your DNS resolver(s)
and the ip name-server command to specify up to three DNS servers to query on host lookups.
•
The ip domain-lookup command enables the DNS resolver.
Examples
-> ip domain-lookup
-> no ip domain-lookup
Release History
Release 6.6.1; command was introduced.
Related Commands
ip name-server
ipv6 name-server
ip domain-name
show dns
MIB Objects
systemDNS
systemDNSEnableDnsResolver
page 11-2
Specifies the IP addresses of up to three servers to query on a host
lookup.
Specifies the IPv6 addresses of up to three IPv6 DNS servers to query
on a host lookup.
Sets or deletes the default domain name for DNS lookups.
Displays the current DNS resolver configuration and status.
OmniSwitch 6250 CLI Reference Guide
DNS Commands
November 2009