Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 817

VLAN Management Commands
output definitions
port admin
port oper
Release History
Release 6.6.1; command was introduced..
Related Commands
show vlan
show vlan router mac status
show vlan gvrp
show vlan ipmvlan
show ip interface
MIB Objects
vlanMgrVpa
vpaTable
vpaVlanNumber
vpaIfIndex
vpaType
vpaState
vpaStatus
vlanMgrVlan
vlanTable
vlanAdmStatus
vlanOperStatus
OmniSwitch 6250 CLI Reference Guide
Port administrative status: on (enabled) allows the port to send and
receive data when it is active; off (disabled) prevents the port from
sending and receiving traffic even if it has an active connection.
Port operational status: on (enabled) or off (disabled). If a port is cur-
rently in use, then the operational status is enabled. A port must have an
enabled administrative status before it can become operationally
enabled.
Displays list of VLANs configured on the switch.
Displays the current MAC router operating mode (single or multiple)
and VLAN router interface statistics.
Displays a list of VLANs learned through GVRP and their details.
Displays IPMVLAN information for a specific IPMVLAN, a range of
IPMVLANs, or all the IPMVLANs.
Displays IP router information.
November 2009 page 22-17