Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 510

Related Commands
bridge mode
bridge path cost mode
bridge cist slot/port path cost
bridge msti slot/port path cost
bridge 1x1 slot/port path cost
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPathCost
page 16-70
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Selects a 32-bit or automatic path cost mode for the switch.
Explicit command for configuring the Spanning Tree path cost for a port
or an aggregate of ports for the CIST instance when the switch is operat-
ing in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree path cost for a port
or an aggregate of ports for an MSTI when the switch is operating in
either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree path cost for a port
or an aggregate of ports for a VLAN instance when the switch is operat-
ing in either the 1x1 or flat mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009