Network Time Protocol Commands
•
Use the version keyword to set the correct version of NTP.
•
Use the minpoll keyword to set the minimum poll time for the server. This number is determined by
raising 2 to the power of the number entered. Therefore, if 4 were entered, the minimum poll time
would be 16 seconds (2
is exceeded.
Examples
-> ntp server 1.1.1.1
-> ntp server spartacus
-> ntp server 1.1.1.1 key 1
-> ntp server 1.1.1.1 version 4
-> ntp server spartacus minpoll 5
-> no ntp server 1.1.1.1
Release History
Release 6.6.1; command was introduced.
Related Commands
ntp client
MIB Objects
alaNtpConfig
alaNtpPeerAddressType
alaNtpPeerType
alaNtpPeerAuth
alaNtpPeerVersion
alaNtpPeerMinpoll
alaNtpPeerPrefer
alaNtpPeerAddress
OmniSwitch 6250 CLI Reference Guide
4
= 16). The client will poll the server for a time update when the minpoll time
Enables or disables NTP operation on the switch.
November 2009
page 5-3