Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 660

Related Commands
port-security
port-security mac-range
port-security shutdown
port-security maximum
port-security violation
MIB Objects
learnedPortSecurityL2MacAddressTable
lpsL2MacAddress
lpsL2VlanId
lpsL2MacAddressRowStatus
page 19-12
Enables or disables Learned Port Security (LPS) on the switch port(s).
Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
OmniSwitch 6250 CLI Reference Guide
Learned Port Security Commands
November 2009