Show Ethoam Domain Association - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet OAM Commands

show ethoam domain association

Displays the information of a specific MA in a Management Domain configured on the bridge.
show ethoam domain {domain_name | mac_address} association association_name
Syntax Definitions
domain_name
mac_address
association_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam domain esd.alcatel-lucent.com association alcatel-sales
Vlan : 100,
MA-MHFstatus : mhfNone,
CCM-interval : interval10s,
MEP-List(MEP-Id) : 3 4,
Legend: MEP-Id: * = Inactive Endpoint
MEP-ID Admin State Direction
--------+-----------+----------+-------------------+------
3
Total number of MEPs configured in this MA = 1
output definitions
Vlan
MA-MHFstatus
CCM-interval
MEP-ID
Admin State
OmniSwitch 6250 CLI Reference Guide
Specifies the domain name.
Specifies the CFM system MAC address.
Name of the Ethernet OAM Association.
Mac-Address
up up 00:D0:95:EC:84:B0
The VLAN ID monitored by this MA. If the MA is not attached to any
VLAN, 0 will be displayed.
Indicates whether the maintenance entity can create MHFs for this MA.
Options include none, explicit, or default.
The interval between the CCM transmissions.
Indicates the Maintenance End Point.
Indicates the administrative state (up or down) of the MEP.
November 2009
Port
1/2
page 25-39