Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 973

LINK OAM Commands
Related Commands
efm-oam port mode
show efm-oam configuration
show efm-oam port
show efm-oam port detail
MIB Objects
dot3OamTable
dot3OamAdminState
OmniSwitch 6250 CLI Reference Guide
Configure a LINK OAM mode on the port or on the range of ports
to active or passive.
Displays the global LINK OAM configuration.
Displays the status of LINK OAM on all the ports in the system,
along with other relevant information such as OAM mode, opera-
tional status and loopback status of the port.
Displays the configuration and other related parameters for a port.
November 2009 page 26-5