Lacp Linkagg Admin State - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

lacp linkagg admin state

Configures the administrative state of the dynamic aggregate (whether it is up and active, or down and
inactive) group.
lacp linkagg agg_num admin state {enable | disable}
Syntax Definitions
agg_num
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When the administrative state is set to disable, the operation of a dynamic aggregation (LACP) group
cannot be performed.
Examples
-> lacp linkagg 2 admin state disable
Release History
Release 6.6.1; command was introduced.
page 12-12
The number corresponding to the dynamic aggregate group.
Specifies that the dynamic aggregate group is active and is able to
aggregate links.
Specifies that the operation of a dynamic aggregate group cannot be
performed.
default
enable
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
November 2009