Lanpower Power - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Power over Ethernet (PoE) Commands

lanpower power

Specifies the maximum amount of inline power, in milliwatts, allocated to a specific PoE port. The value
specified is used to supply inline power to devices such as IP telephones and wireless LAN devices.
lanpower {slot/port | slot} power milliwatts
Syntax Definitions
slot/port
milliwatts
Defaults
parameter
milliwatts (802.3af ports)
milliwatts (802.3at ports)
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
•
To globally specify the amount of inline power allocated to all ports in a slot, refer to the
maxpower command on page
•
Be sure that the value specified complies with specific power requirements for all attached IP tele-
phones and wireless LAN devices.
•
Note that the power value for the
related command,
Examples
-> lanpower 3/1 power 3025
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
A PoE port on which the maximum amount of inline power is being
allocated.
The maximum amount of inline power, in milliwatts, being allocated to
the corresponding port (3000–16000 or 3000-31000).
default
16000
31000
4-7.
lanpower power
lanpower maxpower, is specified in watts (W).
November 2009
command is specified in milliwatts (mW); the
lanpower
page 4-5