show ethernet-service uni
Displays a list of UNI ports configured for the switch and the profile association for each port.
show ethernet-services uni [slot/port | linkagg agg_num]
Syntax Definitions
slot/port
agg_num
Defaults
By default, profile information for all UNI ports is displayed if a slot/port or link aggregate ID number is
not specified.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specify a slot/port or link aggregate ID number to display information for a single slot/port or link aggre-
gate ID.
Examples
-> show ethernet-service uni
Port
UNI Profile
+--------+--------------------+
1/1
uni-profile-default
1/2
multi-site
1/3
multi-site
- show ethernet-service uni 1/3
Port
UNI Profile
+--------+--------------------+
1/3
multi-site
output definitions
Port
UNI Profile
Release History
Release 6.6.1; command was introduced.
page 24-42
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The link aggregate ID number (0–31).
The slot/port number or link aggregate ID for the UNI port.
The UNI profile associated with the port.
OmniSwitch CLI Reference Guide
VLAN Stacking Commands
November 2009