Show Interfaces Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet Port Commands

show interfaces port

Displays interface port status (up or down).
show interfaces [slot[/port[-port2]]] port
Syntax Definitions
slot
port
port2
Defaults
The status for all ports is displayed if a specific slot/port value is not specified with this command.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
You can display a specific interface by entering the slot and port number.
•
You can display a range of port numbers (e.g., 3/1-4).
•
You can display all interfaces in a slot by entering the slot number (e.g., 3).
Examples
-> show interfaces port
Slot/ Admin
Port Status
-----+----------+---------+----------+-----------------------------------------
1/1 enable
1/2 enable
1/3 enable
1/4 enable
-> show interfaces 1/24 port
Slot/Port Admin Status
----------+--------------+------------+----------------+-----------------------
1/24 enable
output definitions
Slot/Port
Admin Status
Link Status
OmniSwitch 6250 CLI Reference Guide
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Link Violations
Status
down none
down none
down none
down none
Link Status
down
Interface slot and port number.
Port status (enable/disable).
Operational status (enable/disable).
November 2009
Alias
""
""
""
""
Violations
NETSEC
Alias
""
page 20-59