Show Interfaces Hybrid Collisions - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces hybrid collisions

Displays interface collision information (e.g., number of collisions, number of retries) for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} collisions
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
If a specific slot or slot/port number is not entered with this command, the information for all switch
combo ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display collision information for a specific
combo port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
•
These counters do not apply to Gigabit Ethernet traffic.
Examples
-> show interfaces 1/25 hybrid copper collisions
01/25,
Rx Collisions = 6.56E18,
Rx Multiple Collisions = 6325235326,
page 20-86
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper RJ-45 port(s) will be displayed.
Rx Single Collision = 345464364,
Rx Excessive Collisions = 5.65E19
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
November 2009