Show Microcode - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show microcode

Displays microcode versions installed on the switch.
show microcode [working | certified | loaded]
Syntax Definitions
working
certified
loaded
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If no additional parameters are entered (i.e., working, certified, or loaded), microcode information for
the running configuration will be displayed.
•
This command can also be used on the secondary CMM.
Examples
-> show microcode
Package
-----------------+---------------+--------+-----------------------------------
Jbase.img
Jos.img
Jadvrout.img
page 1-18
Specifies the switch's working directory; only microcode information
from the working directory will be displayed.
Specifies the switch's certified directory; only microcode information
from the certified directory will be displayed.
Specifies that only loaded (i.e., currently-active) microcode versions
will be displayed. Idle microcode versions will not be displayed.
Release Size
6.1.1.403.R01 10520989 Alcatel-Lucent Base Software
6.1.1.403.R01 1828255 Alcatel-Lucent OS
6.1.1.403.R01 1359435 Alcatel-Lucent Advanced Routing
Description
OmniSwitch 6250 CLI Reference Guide
CMM Commands
November 2009