Show Spantree Cist Vlan-Map - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Distributed Spanning Tree Commands

show spantree cist vlan-map

Displays the range of VLANs associated with the flat mode Common and Internal Spanning Tree (CIST)
instance.
show spantree cist vlan-map
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This command is available when the switch is operating in either the 1x1 or flat Spanning Tree mode.
•
Initially all VLANs are associated with the flat mode CIST instance 0 (also known as MSTI 0).
Examples
-> show spantree cist vlan-map
Spanning Tree Cist Vlan map
-----------------------------
Cist
Name
VLAN list
output definitions
Name
VLAN list
Release History
Release 6.6.1; command was introduced.
Related Commands
show spantree mst region
show spantree msti vlan-map
show spantree map-msti
OmniSwitch 6250 CLI Reference Guide
:
: 1-9,14-4094
An alphanumeric value that identifies the name of the CIST. Use the
bridge msti
The range of VLAN IDs that are associated with the CIST instance.
Displays the MST region information for the switch.
Displays the range of VLANs associated to the specified MSTI.
Displays the MSTI that is associated to the specified VLAN
November 2009
command to define a name for this instance.
page 16-165