output definitions (continued)
Wait time
Cfg-Pause
Cfg-Cross
Hybrid Type
Release History
Release 6.6.1; command was introduced.
Related Commands
show interfaces pause
MIB Objects
esmConfTable
esmPortCfgSlot
esmPortCfgIF
esmPortPauseSlotTime
esmPortActiveHybridType
esmHybridConfTable
esmHybridPortCfgFlow
esmHybridPortCfgCrossover
dot3PauseTable
dot3PauseSlotTime
page 20-76
The amount of time, in microseconds, the neighbor interface will wait
after receiving a PAUSE frame from the local interface.
The flow control setting (Tx = transmit, Rx = receive, Tx-N-Rx =
transmit and receive). Configured through the
command.
The user-configured cross-over setting (Auto, MDI, or MDIX). Con-
figured through the
interfaces hybrid crossover
The configured active media type for the hybrid port (F = fiber, C =
copper, NA = not applicable).
Displays the interface flow control pause settings.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
interfaces hybrid pause
command.
November 2009