Tty - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Hide thumbs Also See for OmniSwitch 6250:
Table of Contents

Advertisement

File Management Commands

tty

Specifies the number of lines and columns to be displayed on the terminal screen while the switch is in the
edit file mode.
tty lines columns
Syntax Definitions
lines
columns
Defaults
parameter
lines
columns
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The number of lines and columns set with this command control the screen size when the switch is
editing or viewing a text file with the
The values set with this command do not control the CLI screen when the switch is operating in normal
mode.
This command can also be used on the secondary CMM.
Examples
-> tty 10 60
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The number of lines to be displayed on the terminal emulation screen
for the current session. Values may range from 10 to 150.
The number of columns to be displayed for each line. One column is the
same width as a single text character. Values may range from 20 to 150.
default
24
80
vi
or
more
commands.
November 2009
page 7-39

Advertisement

Table of Contents
loading

Table of Contents