Vlan Port 802.1X - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Port Mobility Commands

vlan port 802.1x

Enables or disables 802.1X port-based access control on a mobile port.
vlan port slot/port 802.1x {enable | disable}
Syntax Definitions
slot/port
enable
disable
Defaults
By default, 802.1x is disabled on mobile ports.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
At this time, 802.1X is only supported on mobile ports.
•
Authentication and 802.1X are mutually exclusive on a given mobile port.
Examples
-> vlan port 3/1 802.1x enable
-> vlan port 5/2 802.1x disable
-> vlan port 6/1-32 8/10-24 9/3-14 802.1x enable
Release History
Release 6.6.1; command was introduced.
Related Commands
vlan port mobile
vlan port authenticate
show vlan port mobile
OmniSwitch 6250 CLI Reference Guide
The slot number for the module and the physical mobile port number on
that module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots
and ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
Enable 802.1x on the specified mobile port.
Disable 802.1x on the specified mobile port.
Configures Ethernet ports as mobile ports.
Enables or disables authentication on a mobile port.
Displays mobile port properties.
November 2009 page 21-27