Distributed Spanning Tree Commands
bridge mode 1x1 pvst+
Enables or disables PVST+ mode on the switch, enabling it to operate with Cisco switches.
bridge mode 1x1 pvst+ {enable | disable}
Syntax Definitions
enable
disable
Defaults
PVST+ is disabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
In order to handle PVST+ mode, the ports must be configured in 1x1 mode.
•
This command enables the ports to handle PVST+ BPDUs.
•
In this mode, the bridge priority field of the bridge ID can only be changed by a multiple of 4096.
Examples
-> bridge mode 1x1 pvst+ enable
-> bridge mode 1x1 pvst+ disable
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge port pvst+
MIB Objects
vStpTable
vStpMode
vStpModePVST
OmniSwitch 6250 CLI Reference Guide
Enables the pvst+ mode.
Disables the pvst+ mode.
Configures the type of BPDU to be used on a port when PVST+ mode is
enabled.
November 2009
page 16-173