Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 517

Distributed Spanning Tree Commands
Related Commands
bridge mode
bridge slot/port path cost
bridge cist slot/port path cost
bridge 1x1 slot/port path cost
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPathCost
OmniSwitch 6250 CLI Reference Guide
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports that applies to the specified CIST or
VLAN instance.
Explicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports for the CIST instance when the switch is
operating in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports for a VLAN instance when the switch is
operating in either the 1x1 or flat mode.
November 2009 page 16-77