Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 645

Source Learning Commands
output definitions
Permanent Address Count
DeleteOnReset Address Count The number of static MAC addresses configured on the switch with a
DeleteOnTimeout Address
Count
Dynamic Learned Address
Count
Total MAC Address In Use
Release History
Release 6.6.1; command was introduced.
Related Commands
show mac-address-table
show mac-address-table aging-
time
OmniSwitch 6250 CLI Reference Guide
The number of static MAC addresses configured on the switch with a
permanent management status (MAC address is never aged out).
reset management status (MAC address is deleted on the next switch
reboot).
The number of static MAC addresses configured on the switch with a
timeout management status (MAC address ages out according to the
MAC address table aging timer value).
The number of MAC addresses learned by the switch. These are MAC
addresses that are not statically configured addresses.
The total number of MAC addresses (learned and static) that are known
to the switch.
Displays Source Learning MAC Address Table information.
Displays the current aging time value for the Source Learning MAC
Address Table.
November 2009 page 18-17