Ethernet OAM Commands
ethoam endpoint admin-state
Configures the administrative state of MEP.
ethoam endpoint mep_id domain {domain_name | mac_address} association association_name admin-
state {enable | disable}
Syntax Definitions
mep_id
domain_name
mac_address
association_name
enable
disable
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
The mep_id should be unique amid all those used by or available to the service provider in the specified
MA.
Examples
-> ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales
admin-state enable
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Specifies the Maintenance Association End Point. The valid range is
1–8191.
Specifies the domain name. For more information on the different
formats of the domain name, refer to
page
25-3.
Specifies the CFM system MAC address.
Association name of the Ethernet OAM Association. Up to 48 (minus
the domain name length) characters may be used.
Administratively enables MEP.
Administratively disables MEP.
November 2009
ethoam domain command on
page 25-19