Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 597

Distributed Spanning Tree Commands
Spanning Tree Port Summary for Vlan 12
Oper Path
Port St Cost
-----+----+-------+-------+----+-----+---+---+----------------------
1/42 DIS
1/43 DIS
Spanning Tree Port Summary for Vlan 13
Oper Path
Port St Cost
-----+----+-------+-------+----+-----+---+---+----------------------
1/38 DIS
output definitions
Vlan
Port
Oper St
Path Cost
Desig Cost
Role
Prim. Port
Op Cnx
Op Edg
Desig Bridge ID
OmniSwitch 6250 CLI Reference Guide
Desig Prim. Op
Cost Role Port
0 0 DIS 1/42
0 0 DIS 1/43
Desig Prim. Op
Cost Role Port
0 0 DIS 1/38
The VLAN ID associated with the VLAN Spanning Tree instance.
Configured through the
The slot number for the module and the physical port number or a logi-
cal port. If the slot number is 0, then the port number refers to a link
aggregate logical port number (e.g., 0/31).
The port operational state as defined by application of the Spanning
Tree Protocol. Possible port operational states include: disabled, block-
ing, listening, learning, and forwarding.
The contribution of this port to the path cost towards the Spanning Tree
root bridge that includes this port. Path cost is a measure of the distance
of the listed port from the root bridge in the number of hops. Config-
ured through the
The path cost of the Designated Port of the segment connected to this
port. If this is the root bridge or the Spanning Tree status of the port is
administratively disabled, this value is 0.
The role of the port for this Spanning Tree instance. Possible port roles
are: root, designated, alternate, master, and backup.
The slot number for the module and the physical port number on that
module for the primary port associated with this Spanning Tree
instance. This information is only available if the port role is backup.
Operational connection type: PTP, NPT, or NS (nonsignificant).
Shows the current operational state of the port's connection type. See
the bridge slot/port connection
information.
Operational connection type: EDG. Shows the current operational state
of the port's connection type. See the
command on
The bridge identifier for the designated bridge for this port's segment.
November 2009
Op
Cnx Edg Desig Bridge ID
NS EDG 0000-00:00:00:00:00:00
NS NO 0000-00:00:00:00:00:00
Op
Cnx Edg Desig Bridge ID
NS EDG 0000-00:00:00:00:00:00
vlan commands
bridge 1x1 slot/port path cost
command on
page 16-87 for more information.
command.
page 16-87 for more
bridge slot/port connection
page 16-157