Related Commands
bridge mode
bridge hello time
bridge 1x1 hello time
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsBridgeHelloTime
page 16-32
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree hello time value for
the flat mode CIST instance or for a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree hello time value for a
VLAN instance when the switch is operating in either the flat or 1x1
mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009