Show Interfaces Hybrid - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet Port Commands

show interfaces hybrid

Displays general interface information (e.g., hardware, MAC address, input errors, output errors) for
combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper}
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If no slot/port numbers are entered, information for all slots/ports on the switch is displayed.
•
You can display a specific interface by entering the slot and port number (e.g., 3/1).
•
You can display a range of port numbers (e.g., 3/1-4).
•
You can display all interfaces in a slot by entering the slot number (e.g., 3).
OmniSwitch 6250 CLI Reference Guide
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that the status of the SFP port(s) will be displayed.
Specifies that the status of the copper RJ-45 port(s) will be displayed.
November 2009 page 20-67